The Hyster S60FT is a robust LPG-powered forklift designed for demanding industrial applications. Its instrument cluster provides vital operational information and warnings to keep the machine running safely and efficiently.
Hyster S60FT Warning Light Symbols
| Symbol | Name | Color | What it means | What to do |
|---|---|---|---|---|
| Master Warning (Stop) | RED | A serious fault has been detected that could cause damage or unsafe operation on the S60FT. | Safely stop the forklift and investigate the cause before resuming use. | |
| Master Caution | AMBER | A non-critical malfunction or warning has occurred, but the truck can still be operated with care. | Check the display for more details and address warnings as soon as possible. | |
| Check Engine (MIL) | AMBER | The engine management system has detected a fault affecting performance or emissions on the S60FT. | Schedule service promptly; continued operation may reduce efficiency. | |
| Engine Oil Pressure | RED | Engine oil pressure has dropped below safe levels in the S60FT’s engine. | Shut down the engine immediately to avoid damage and check oil level. | |
| Battery / Charging | RED | The alternator is not charging the battery, risking a stall or no-start condition. | Inspect the charging system and avoid shutting off the engine until fixed. | |
| Coolant Temperature | RED | The engine coolant temperature is excessively high, risking overheating. | Stop the forklift, allow it to cool, and check coolant level. | |
| Transmission Temp | RED | The transmission fluid temperature is above safe operating limits on the S60FT. | Pause operation to let the transmission cool before proceeding. | |
| Brake System | RED | A fault in the main brake system has been detected, affecting stopping ability. | Do not drive; inspect the brakes immediately. | |
| Parking Brake | RED | The parking brake is engaged while the S60FT is in gear or moving. | Release the parking brake before driving. | |
| Low Fuel | AMBER | The LPG fuel tank is nearing empty, risking engine shutdown. | Refuel the forklift soon to prevent stalling. | |
| Hydraulic System | AMBER | A hydraulic system issue has been detected, possibly affecting lift or tilt. | Check hydraulic fluid level and look for leaks. | |
| Hydraulic Oil | AMBER | Hydraulic oil level or pressure is below the recommended range. | Top up hydraulic oil and inspect for leaks. | |
| Air Filter | AMBER | The engine air filter is clogged, reducing airflow and engine performance. | Clean or replace the air filter promptly. | |
| Fuel Filter / Water Separator | AMBER | The fuel filter is restricted or water has accumulated in the separator. | Drain water and replace the filter as needed. | |
| Service / Hour Meter | AMBER | Scheduled maintenance is due according to the S60FT’s hour meter. | Arrange for regular servicing to maintain reliability. | |
| Work Lights | GREEN | The S60FT’s work lights are currently switched on. | No action needed unless lights are not required. | |
| Beacon / Rotating Light | AMBER | The safety beacon is active, warning others of forklift movement. | Confirm beacon is functioning in busy areas. | |
| Fasten Seat Belt | RED | The operator’s seat belt is not fastened while the S60FT is powered. | Buckle the seat belt before operating the forklift. | |
| Overload / Capacity | RED | The S60FT is carrying or attempting to lift a load over its rated capacity. | Lower the load immediately and verify weight before lifting. |
19 symbols shown. Icons follow ISO 2575 dashboard standards; exact graphics vary by model year.
Most Important Warning Lights
Engine Oil Pressure Warning
Common causes
- Low engine oil level
- Oil pump failure
- Oil filter blockage
What to do
Stop the S60FT immediately, check and top up engine oil, and contact service if the warning persists.
Coolant Temperature Warning
Common causes
- Low coolant level
- Radiator blockage
- Thermostat malfunction
What to do
Let the forklift cool down, inspect coolant level, and clean the radiator; seek service if overheating continues.
Transmission Temperature Warning
Common causes
- Low transmission fluid
- Heavy load or continuous operation
- Cooling system fault
What to do
Pause operation to allow cooling, check fluid level, and service the transmission if needed.
Brake System Warning
Common causes
- Brake fluid leak
- Worn brake pads or shoes
- Hydraulic brake failure
What to do
Cease operation and have the brakes inspected and repaired before further use.
Overload Warning
Common causes
- Attempting to lift load beyond S60FT’s capacity
- Incorrect load placement
- Faulty load sensor
What to do
Lower the load to within the rated capacity and verify load weight before proceeding.
Frequently Asked Questions
What should I do if I see the Master Warning light on my S60FT?
Immediately stop the forklift in a safe area and investigate the cause as this indicates a critical issue.
How often should I service the Hyster S60FT according to the hour meter?
Follow the maintenance intervals in the operator’s manual, typically every 250 hours for standard service.
Why does the Check Engine light come on even when the forklift seems to run fine?
A minor engine or emission fault may be present; have diagnostics run to prevent future breakdowns.
Can I continue working if the hydraulic system warning light is on?
You should check the hydraulic fluid level and inspect for leaks before continuing to avoid system damage.
What does it mean if the overload indicator activates?
The forklift is attempting to lift more than its rated capacity; reduce the load immediately to prevent tipping or damage.