The Still RX60-35 is an electric forklift designed for demanding industrial environments, offering a blend of performance, efficiency, and operator comfort. Its instrument cluster provides clear, model-specific warning and status lights to keep operators informed and ensure safe operation. Understanding these indicators is essential for maximizing uptime and avoiding costly repairs.
Still RX60-35 Warning Light Symbols
| Symbol | Name | Color | What it means | What to do |
|---|---|---|---|---|
| Master Warning (Stop) | RED | A critical fault has been detected by the RX60-35’s control system, such as a major electrical failure or severe overload. | Stop the forklift immediately and contact Still service support before restarting. | |
| Master Caution | AMBER | A cautionary issue has been logged, like a sensor fault or minor system irregularity, that may impact operation if ignored. | Check the display for more details and arrange service soon. | |
| Battery / Charging | RED | The main traction battery’s charge is critically low, or a charging system fault is detected in your RX60-35. | Cease operation and recharge or inspect the battery and charger connections. | |
| Battery Discharge (BDI) | AMBER | The battery discharge indicator shows the RX60-35’s battery is approaching its minimum safe operating level. | Plan to recharge soon to prevent automatic performance reduction. | |
| Hydraulic System | AMBER | A fault or pressure drop has been detected in the hydraulic circuit, potentially affecting lifting and steering functions. | Inspect for hydraulic leaks and check fluid levels before continuing. | |
| Overload / Capacity | RED | The RX60-35 has detected a load above its rated capacity or unsafe mast angle. | Lower the load and ensure you are within the forklift’s limits. | |
| Mast / Lift Limit | AMBER | The mast has reached a programmed lift or tilt limit, or a mast sensor has triggered a restriction. | Adjust the load or mast position to stay within safe parameters. | |
| Brake System | RED | A serious brake malfunction is detected, such as low brake pressure or system failure. | Stop the forklift safely and request immediate maintenance. | |
| Parking Brake | RED | The parking brake is engaged while the RX60-35 is powered or a fault is detected in the brake circuit. | Release the parking brake before moving, or check for brake faults. | |
| ABS | AMBER | A problem with the RX60-35’s anti-lock braking system has been detected. | Drive with extra caution and have the ABS checked soon. | |
| Hydraulic Oil | AMBER | The hydraulic oil level or quality is below the required threshold for safe operation. | Top up or replace the hydraulic oil as soon as possible. | |
| Low Fuel | AMBER | For RX60-35 variants with auxiliary heaters or engines, low fuel for the heater system is detected. | Refill the auxiliary fuel tank soon if equipped. | |
| Service / Hour Meter | AMBER | Scheduled maintenance is due based on the RX60-35’s operating hours. | Arrange for routine service to avoid unplanned downtime. | |
| Work Lights | BLUE | The RX60-35’s work lights are currently switched on for improved visibility. | No action needed unless lights are not required. | |
| Beacon / Rotating Light | AMBER | The warning beacon is active, signaling the RX60-35 is in operation. | Ensure the beacon is functioning in pedestrian areas. | |
| Fasten Seat Belt | RED | The operator’s seat belt is not fastened while the RX60-35 is powered. | Secure the seat belt before operating. |
16 symbols shown. Icons follow ISO 2575 dashboard standards; exact graphics vary by model year.
Most Important Warning Lights
Master Warning (Stop)
Common causes
- Major electrical fault in drive system
- Critical overload or mast tilt error
- Severe battery or controller malfunction
What to do
Switch off the RX60-35, secure the area, and contact a Still service technician to diagnose and resolve the fault before further use.
Battery / Charging
Common causes
- Battery charge below safe threshold
- Charger connection issue
- Traction battery cell failure
What to do
Recharge the battery fully using the correct Still charger; if the warning persists, inspect battery terminals and request battery diagnostics.
Overload / Capacity
Common causes
- Attempting to lift a load above the RX60-35’s rated capacity
- Incorrect load distribution on forks
- Excessive mast tilt or unsafe operating angle
What to do
Lower the load immediately, verify actual weight and mast position, and ensure you are operating within the RX60-35’s load chart specifications.
Brake System
Common causes
- Hydraulic brake fluid loss
- Brake actuator or sensor failure
- Worn brake pads or calipers
What to do
Stop the forklift in a safe spot, check brake fluid levels, and arrange for immediate inspection and repair by Still service personnel.
Hydraulic System
Common causes
- Low hydraulic fluid level
- Hydraulic pump malfunction
- Leak in hydraulic lines or fittings
What to do
Inspect the RX60-35 for visible leaks, top up hydraulic fluid if necessary, and schedule service to address any system faults.
Frequently Asked Questions
What should I do if the battery discharge indicator comes on during a shift?
Plan to complete your current task and then recharge the RX60-35’s battery before the performance reduction threshold is reached.
Can I keep driving if the hydraulic oil light is on?
You should stop as soon as it is safe, check the hydraulic oil level, and top up if needed to avoid damage to the hydraulic components.
Why does the overload light activate when my load seems within limits?
The RX60-35’s sensors may detect unsafe mast tilt or improper load distribution; always verify both weight and load position.
How often does the RX60-35 require scheduled service?
Service intervals are based on operating hours and will be indicated by the hour meter symbol; follow the maintenance plan in the operator’s manual.
What does it mean if the parking brake light stays on after releasing the brake?
This can indicate a fault in the brake circuit or a sensor issue; do not drive until the parking brake system is checked.
Are all warning lights shown on every RX60-35?
Some indicators may only be present on certain configurations or with specific options; consult your model’s operator manual for exact details.