The Still RX50-20 is a compact electric forklift designed for tight warehouse operations and precise material handling. Its instrument cluster provides crucial real-time feedback to operators, ensuring both safety and optimal performance in demanding environments.
Still RX50-20 Warning Light Symbols
| Symbol | Name | Color | What it means | What to do |
|---|---|---|---|---|
| Master Warning (Stop) | RED | A severe system fault or safety issue has been detected, signaling you must halt operation of the RX50-20 immediately. | Stop the forklift safely and consult the error code on the display or operator manual. | |
| Master Caution | AMBER | A non-critical system warning has been triggered, such as a sensor fault or minor malfunction. | Check the display for additional information and plan maintenance soon. | |
| Battery / Charging | RED | The traction battery voltage has dropped below the safe threshold, risking a shutdown of the RX50-20. | Return to the charging station and recharge the battery before further use. | |
| Battery Discharge (BDI) | AMBER | The battery discharge indicator shows the battery is nearing its minimum charge level for safe operation. | Prepare to finish your current task and recharge soon to avoid automatic lift cutout. | |
| Hydraulic System | AMBER | A hydraulic system fault or pressure anomaly has been detected, potentially affecting lift or tilt functions. | Inspect for hydraulic leaks or abnormal noises and schedule prompt service. | |
| Mast / Lift Limit | AMBER | The mast has reached its maximum permitted height or a lift limit switch has been activated. | Lower the forks slightly to disengage the limit and avoid overextension. | |
| Overload / Capacity | RED | The RX50-20 has detected a load exceeding its rated capacity, risking tip-over or damage. | Lower the load immediately and reduce weight to within the forklift's specifications. | |
| Brake System | RED | A fault in the braking system has been identified, compromising safe stopping ability. | Cease operation and have the brakes inspected and repaired by qualified personnel. | |
| Parking Brake | RED | The parking brake is engaged, preventing the RX50-20 from moving. | Release the parking brake before attempting to drive. | |
| Service / Hour Meter | AMBER | Scheduled maintenance is due based on the RX50-20's operating hours. | Arrange for the next service interval as soon as possible to maintain reliability. | |
| Work Lights | GREEN | The RX50-20's work lights are switched on for enhanced visibility. | No action needed unless lights are required to be off. | |
| Beacon / Rotating Light | AMBER | The warning beacon is active, signaling the RX50-20's presence to others in the area. | Ensure the beacon remains on when operating in shared spaces. | |
| Fasten Seat Belt | AMBER | The operator's seatbelt is not fastened, violating RX50-20 safety protocols. | Buckle the seatbelt before starting or moving the forklift. |
13 symbols shown. Icons follow ISO 2575 dashboard standards; exact graphics vary by model year.
Most Important Warning Lights
Overload / Capacity
Common causes
- Attempting to lift a load beyond the rated capacity
- Incorrect load distribution on forks
- Faulty load sensor
What to do
Immediately lower the load, check the load's weight, and ensure proper placement. Only operate the RX50-20 within its specified lifting limits.
Battery / Charging
Common causes
- Battery deeply discharged from prolonged use
- Charger malfunction
- Defective battery cell
What to do
Stop using the forklift, connect it to the approved charger, and monitor charging. If the issue persists, have the battery and charger checked by Still service.
Brake System
Common causes
- Worn brake pads or discs
- Hydraulic fluid leak (if equipped)
- Brake actuator failure
What to do
Remove the RX50-20 from service, inspect the brake components, and have any faulty parts replaced by a qualified technician before resuming operation.
Hydraulic System
Common causes
- Low hydraulic fluid level
- Damaged hydraulic hose or cylinder
- Contaminated hydraulic oil
What to do
Check fluid levels, inspect lines and cylinders for leaks or damage, and replace the hydraulic oil if contamination is found.
Frequently Asked Questions
What should I do if the Battery Discharge Indicator (BDI) flashes during use?
Complete your current task and return the RX50-20 to the charging station promptly, as continued operation may trigger a lift function cutout.
Why does the Overload warning appear even with a seemingly light load?
Check that the load is centered and properly placed on the forks, and ensure the load weight is within the RX50-20's rated capacity.
How often does the RX50-20 require service based on the hour meter?
Follow the maintenance intervals specified in the operator's manual, typically every 500 operating hours for routine checks.
Can I continue to drive if the hydraulic warning light is on?
Avoid using the lifting functions and have the hydraulic system inspected as soon as possible to prevent further damage.
What does the fasten seat belt light mean if I am already buckled?
Inspect the seatbelt sensor for dirt or damage, and ensure the buckle clicks securely; if the issue remains, request service.