The Still RX50-16 is a compact electric forklift designed for tight warehouse operations and indoor material handling. Its instrument cluster delivers essential status updates and warnings to maximize uptime and operator safety. Understanding the specific warning lights is crucial for maintaining optimal performance and preventing costly downtime.
Still RX50-16 Warning Light Symbols
| Symbol | Name | Color | What it means | What to do |
|---|---|---|---|---|
| Master Warning (Stop) | RED | A critical fault has been detected on the RX50-16, potentially endangering safe operation. | Stop the forklift at once and consult the service manual or technician. | |
| Master Caution | AMBER | A non-critical fault has been registered that needs attention but does not require immediate shutdown. | Schedule inspection for the flagged system as soon as possible. | |
| Battery / Charging | RED | The RX50-16's traction battery voltage is too low or charging is interrupted. | Return to the charging station without delay to avoid breakdown. | |
| Battery Discharge (BDI) | AMBER | Battery charge on the RX50-16 is nearing its minimum safe level. | Plan to finish your task and drive to recharge soon. | |
| Hydraulic System | AMBER | The hydraulic fluid level or pressure is outside the recommended range for safe lifting. | Check hydraulic fluid and inspect for leaks before resuming operations. | |
| Hydraulic Oil | AMBER | Hydraulic oil temperature or level is abnormal in the RX50-16. | Allow the system to cool and check oil level; refill if necessary. | |
| Service / Hour Meter | AMBER | Scheduled maintenance interval has been reached based on the forklift's operating hours. | Arrange for routine service according to the RX50-16 maintenance plan. | |
| Mast / Lift Limit | AMBER | Mast or lift function is at its upper or lower operational limit, or a lift height warning is active. | Lower the forks or adjust mast as needed to stay within safe limits. | |
| Overload / Capacity | RED | The RX50-16 has detected a load exceeding its rated lifting capacity. | Lower the load immediately and check weight compliance. | |
| Brake System | RED | A fault in the braking system is affecting the RX50-16's ability to stop reliably. | Cease operation and have the brakes inspected before use. | |
| Parking Brake | RED | The parking brake is engaged or not releasing fully on the RX50-16. | Release the parking brake before driving; if stuck, seek technical support. | |
| Seat Belt | AMBER | The seat belt is not fastened while the RX50-16 is powered on. | Buckle the seat belt before operating the forklift. | |
| Work Lights | GREEN | Work lights are activated for enhanced visibility in the RX50-16. | No action needed unless lights are not required. | |
| Beacon / Rotating Light | AMBER | The warning beacon is switched on to alert others of the RX50-16's movement. | Ensure beacon is working, especially in busy areas. | |
| Door Open | AMBER | A cab or battery compartment door is not fully closed on the RX50-16. | Secure all doors before proceeding. |
15 symbols shown. Icons follow ISO 2575 dashboard standards; exact graphics vary by model year.
Most Important Warning Lights
Overload / Capacity
Common causes
- Load exceeds rated forklift capacity
- Incorrect load positioning
- Faulty load sensor
What to do
Immediately lower the load, verify its weight, and ensure proper placement; if the warning persists, check the load sensor or contact support.
Brake System
Common causes
- Worn brake pads or discs
- Hydraulic brake fluid leak
- Electronic brake fault
What to do
Inspect brake components for wear or leaks and do not operate the RX50-16 until the issue is resolved by qualified personnel.
Battery / Charging
Common causes
- Deep battery discharge
- Faulty charger connection
- Battery cell failure
What to do
Stop using the forklift, connect to the charger, and check for charger or battery faults; replace defective batteries if necessary.
Hydraulic System
Common causes
- Low hydraulic fluid
- Hydraulic leak in lines or cylinders
- Pump malfunction
What to do
Check and refill hydraulic fluid, inspect for visible leaks, and have any persistent issues diagnosed by service personnel.
Frequently Asked Questions
What should I do if the battery discharge indicator stays on after charging?
If the BDI light remains illuminated, inspect the battery and charger for faults, and reset the system if required; persistent issues may signal a faulty battery cell.
How often does the RX50-16 require scheduled maintenance?
Service intervals are based on operating hours, typically every 500 hours, but always follow the specific maintenance schedule in the operator's manual.
Can I drive the RX50-16 with the hydraulic oil warning on?
Do not continue operation with the hydraulic oil warning active, as this can damage the lift system and compromise safety.
Why is the overload light flashing even with a light load?
A flashing overload indicator with a light load may point to a faulty load sensor or incorrect load positioning; have the system checked by a technician.
What does it mean if the seat belt light stays on after fastening?
If the seat belt indicator doesn't go off after buckling, the seat sensor or belt switch may be malfunctioning and should be inspected.