The Still RX60-30 is a high-performance electric forklift designed for intensive industrial applications, offering precision handling and robust safety systems. Its instrument cluster provides critical status and warning indicators tailored for electric forklift operation, ensuring operators remain informed and safe during demanding shifts.
Still RX60-30 Warning Light Symbols
| Symbol | Name | Color | What it means | What to do |
|---|---|---|---|---|
| Master Warning (Stop) | RED | A major system fault has been detected that could compromise safe forklift operation on the RX60-30. | Immediately stop the truck, secure the load, and consult the onboard diagnostics or service manual. | |
| Master Caution | AMBER | A non-critical issue has been identified that should be addressed to prevent escalation. | Review the display for further details and plan maintenance at the earliest opportunity. | |
| Check Engine (MIL) | AMBER | The RX60-30's drive or control electronics have registered an engine or motor system fault. | Schedule service and avoid heavy loads until the issue is diagnosed. | |
| Battery / Charging | RED | The main traction battery is critically low or not charging correctly. | Return to the charging station and inspect the battery and connectors. | |
| Brake System | RED | A malfunction in the RX60-30's braking system has been detected. | Cease operation immediately and have the brakes inspected by a technician. | |
| ABS | AMBER | The anti-lock braking system is disabled or not functioning correctly on your RX60-30. | Drive with extra caution, especially in slippery areas, and arrange for repair. | |
| Parking Brake | RED | The parking brake is engaged, preventing movement of the RX60-30. | Release the parking brake before attempting to drive. | |
| Hydraulic System | AMBER | A hydraulic circuit fault or low pressure is present in the lift or tilt system. | Inspect hydraulic fluid level and look for leaks; service if needed. | |
| Reduced Power (Limp Mode) | AMBER | The RX60-30 has entered limp mode to protect its drive components from further damage. | Limit operation to essential tasks and arrange service promptly. | |
| Hydraulic Oil | AMBER | Hydraulic oil temperature is high or oil level is low in the RX60-30. | Allow the system to cool and check for proper oil level before resuming work. | |
| Low Fuel | AMBER | The battery state of charge is low, indicating the RX60-30 needs recharging soon. | Plan to recharge the forklift before the battery becomes depleted. | |
| Service / Hour Meter | AMBER | Scheduled maintenance interval has been reached based on operating hours. | Arrange for routine service as indicated to avoid unexpected downtime. | |
| Work Lights | BLUE | The RX60-30's work lights are switched on for improved visibility. | No action needed unless lights are not required. | |
| Beacon / Rotating Light | AMBER | The safety beacon is active, alerting those nearby of forklift operation. | Confirm beacon operation in busy areas for optimal safety. | |
| Battery Discharge (BDI) | AMBER | The battery discharge indicator shows the RX60-30's battery is nearing its discharge limit. | Complete current tasks and recharge the battery soon. | |
| Mast / Lift Limit | AMBER | The mast has reached its maximum extension or a lift height limit is active. | Do not attempt to lift further; lower the mast if necessary. | |
| Overload / Capacity | RED | The RX60-30 senses a load above its rated lifting capacity. | Lower the load immediately and ensure future lifts do not exceed rated limits. | |
| Brake Fluid Level | AMBER | Brake fluid level is low in the RX60-30's reservoir. | Check for leaks and top up with the correct brake fluid. | |
| Door Open | AMBER | A cab or battery compartment door is not fully closed. | Secure all doors before operating the forklift. |
19 symbols shown. Icons follow ISO 2575 dashboard standards; exact graphics vary by model year.
Most Important Warning Lights
Master Warning (Stop)
Common causes
- Severe electrical fault in the main drive system
- Critical brake system failure
- Major hydraulic leak or loss of pressure
What to do
Shut down the RX60-30 immediately and do not restart until a qualified technician has diagnosed and repaired the fault.
Overload / Capacity
Common causes
- Attempting to lift a load above the rated 3-ton capacity
- Incorrect load placement on the forks
- Faulty load sensor or mast limit switch
What to do
Lower the load, verify the weight and placement, and if the warning persists without an obvious overload, have the sensors checked by Still service.
Battery / Charging
Common causes
- Battery state of charge critically low
- Connection issue with charging cable or battery terminals
- Defective battery cell or charger
What to do
Return to a charging point, inspect connectors for corrosion or looseness, and replace the battery if it fails to hold charge.
Brake System
Common causes
- Hydraulic brake fluid leak
- Worn brake pads or discs
- Electronic brake control fault
What to do
Discontinue use and have the brake system inspected and repaired by a trained Still technician before resuming operation.
Frequently Asked Questions
What should I do if the RX60-30 shows the battery discharge indicator during a shift?
Plan to finish your current tasks and drive the forklift to the charging area before the battery is fully depleted to avoid unplanned shutdown.
Why does the overload light come on even with a small load?
Check that the load is positioned correctly on the forks and ensure the sensor or mast switch is not obstructed or faulty.
How often should I service the RX60-30 when the hour meter light appears?
Follow the maintenance schedule in the Still RX60-30 manual, typically every 500 operating hours or as indicated by your service provider.
Is it safe to drive the RX60-30 when the ABS warning is on?
You can operate the forklift, but proceed with extra caution as anti-lock braking may not be available, especially on wet or slippery floors.
What does it mean if the hydraulic oil light stays on after topping up?
There may be a sensor issue or continued low pressure—inspect for leaks and contact service if the warning persists.